Next Lift Forklift Forks 60" x 5" x 1.5" Class 2 Pair - 6,400 lb Full Taper

60" x 5" x 1.5" Class 2 Full Taper & Polish Forklift Forks (Pair)

A five-foot full taper fork for the 3,000 to 5,000 lb trucks that live in lumber yards, cabinet shops, and building-supply warehouses. The 5" wide blade gives a stack of plywood or drywall more to sit on than the 4" Class 2 sections, and the heel-to-tip taper with a polished top face lets it slide under unpalletized sheet goods without gouging the bottom sheet.

Why 60" on a Class 2 truck? Because 48" pallets aren't the load. This length is for 8-foot lumber units and doubled sheet-good packs where a shorter fork leaves the back of the load unsupported. If your work is mostly pallets and racking, the 42" or 48" Class 2 FTP is the better buy and turns tighter in an aisle.

Rated 6,400 lb per pair at a 24" load center with a 1.5" thick blade. If you need more capacity in the same footprint, the 5" x 1.75" Class 2 FTP steps up to 8,200 lb. On six-foot loads, check the forklift fork capacity chart for the real load center before running near the limit.

Product Specs

• Part Number: 2A150560FTP
• Includes: One pair of full taper & polish forklift forks, pre-installed fork pin kit
• Mounting: 16" Class 2 carriage (ISO 2328 / ITA Class II)
• Length: 60" · Width: 5" · Thickness: 1.5"
• Load Capacity: 6,400 lb per pair @ 24" load center
• Taper: Full taper, polished top face
• Finish: Powder-coated

Why Next Lift

• FREE shipping to the continental US · 3–5 day delivery
• Meets or exceeds ANSI/ITSDF B56.1
• Inspected for fit before shipment · 1-year warranty on materials and workmanship

Compatible with most Class 2 forklifts: Toyota, Hyster, Yale, Clark, CAT, Nissan, Mitsubishi, Crown, Komatsu, Doosan, and others. Not sure of your class? Measure your carriage.